SWIPE ACCESS CONTROL SAFETY SYSTEM AXS

Sponmech supply swipe control safety systems manufactured by Tecno Più. We can supply only for your own electricians to integrate.

Note! You are still obligated to fit an electrical safety switch to your machine guarding. This product offers an extra layer of protection to control which personnel are authorised to enter the danger zone.

DOWNLOAD THE BROCHURE HERE

CODE AXS 01 - Access Control for perimeter guarding systems

Using a key fob system, the AXS 01 device both allows access and prevents access to dangerous areas or machines that are guarded with perimeter fencing or similar enclosed protection.

The AXS 01 has a personal badge recognition system and it means you can grant access only to authorised employees. Thanks to the simple use of personal badges available to each employee for the marking of entry and exit of any timekeeping system, which uses one of the two available frequencies: 125 KHz and 13,5 MHz, the programming is immediate, through a master badge that is programmed by Tecno Più and remains at the disposal of the manager of the company assigned to the authorisations.

Another benefit of using the AXS 01 system is that you can't accidently trap someone inside the perimeter guarding; the operator with the fob must come out and re-set before the machine will run again.

CODE AXS 10 - Access control for machine tool and forklift operators

Using a swipe card system, the AXS 10 device can allow / prevent access by personnel to a company’s dangerous areas, forklifts, or machines.

Thanks to the simple personal badge recognition system (available to each employee for the marking of entry and exit of any timekeeping system, which uses one of the two available frequencies: 125 KHz and 13,5 MHz), the programming is immediate, through a master badge that is programmed by Tecno Più and remains at the disposal of the manager of the company assigned to the authorisations.

It is a pure access control to the controls of the machine or of the forklift which allows it to be used only by authorised personnel. In case of accidental forgetfulness of deactivation of the system at the end of the use of the machine, the system is programmed to auto-disable after 75 seconds.